Pilot Study on the Development and Integration of Anthropomorphic Models within the Dental Technician Curriculum.

The effectiveness of modern medical education largely depends on the integration and utilization of digital technologies in teaching various disciplines. In this pilot usability study, we introduced 3D printed anthropomorphic dental models, specifically designed for the elective discipline "Digital and Metal-Free Techniques in Dental Technology" from the curriculum of the Dental Technician specialty in the Medical University of Varna. The evaluation focused on dental technician students' perception of this novel learning environment, its influence on their performance, and the potential for future application of these models and related 3D technologies in their professional practice. A validated satisfaction questionnaire was distributed among 80 students, comprising the total cohort. The results indicated a high acceptance rate, with nearly 95% of participants finding the use of digitally created 3D-printed dental models beneficial. More than 90% believed that exploring digital technologies would enhance their skills. The well-trained instructor's competence in technology use convinced students of its value, with more than 98% expressing a willingness to incorporate these technologies into their future work for improved precision in dental models. However, due to the current high cost of needed equipment, only 10% of participants may practicably introduce this novel technology into their practical work. The use of anatomically accurate 3D printed models is a valuable addition to the current dental technician curriculum in medical colleges.

Dental Technicians' Perception of the Quality of Dentists' Communication on the Fabrication of Removable Partial Dentures: A Cross-Sectional Study in Saudi Arabia.

BACKGROUND: Effective and clear communication between the dentist and dental technician plays a vital role in rendering quality prostheses for patients. When fabricating a removable dental prosthesis, it is uncertain if the information received by the dental laboratory technician is clear and sufficient. This investigation aimed to assess dental technicians' perceptions of the quality of dentists' communication on the fabrication of removable partial dentures (RPDs) in Saudi Arabia. METHODOLOGY: After obtaining the institutional review board (IRB) approval from Riyadh Elm University, Riyadh, Saudi Arabia, a cross-sectional survey on a convenient sample of 115 dental technicians registered with the Saudi Commission for Health Specialties was conducted in January 2022. The voluntary participation of 94 technicians fabricating RPDs was included. A 19-item online questionnaire was developed, including quality of written instruction, selection of impression trays, and impression materials for RPD fabrication, shared through Google Docs. Descriptive statistics were tabulated, and responses were displayed as a percentage of the total. RESULTS: Of the 94 study subjects, 35% had less than five years of experience, 44% stated that they routinely receive work authorizations with clear instructions, 13% always used digital technology to fabricate prostheses, and 58% reported difficulty with communicated work authorization by dentists having less than five years of experience. Thirty-three respondents (35.1%) reported that 75% or more of the fabricated partial dentures were cast framework partials. Thirty-three respondents (35.1%) indicated that the master casts received for partial framework construction were usually accurate. Tooth alterations, however, were reported as usually adequate by only 28 respondents (29.8%). For creating the artificial gingiva portion of cast partials, 56 respondents (59.6%) preferred heat-cured acrylic resin. Furthermore, 40 respondents (42.6%) said that 75% or more of the requested partials were entirely made out of acrylic resin. Regarding case design discussions, 26 respondents (27.7%) always engaged with dentists, while 39 (41.5%) did so occasionally. CONCLUSION: The obtained assessments pointed to the fact that dental technicians expressed a perception of inadequacy regarding the work authorizations provided by dentists for the fabrication of RPDs, where they seemingly felt that the instructions conveyed by the dentists were not sufficiently comprehensive or clear.

Assessment of hearing performance of dental technicians due to the professional noise exposure.

BACKGROUND: Some of the noise-intensive processes in dental laboratories include the finishing of crowns, bridges, and removable partial dentures; blowing out workpieces with steam and compressed air; and deflating casting rings. High sound pressure levels are also present in dental vibrators, polishing equipment, and sandblasters. The aim of this study was to Evaluation of the effect of noise production in dental technology laboratory on dental technician hearing capacity. METHODS: For this cross-sectional study, a total of 120 dental technicians were chosen. Otoscopic evaluation and the Weber test were used to establish if they had sensorineural or transmission hearing loss at 500 Hz, 1000 Hz, 2000 Hz, and 4000 Hz, respectively. Then an OAER (objective auditory evoked response) and PTA (clinical aurimeter) test were administered (Neurosoft, Russia). The whole procedure was carried out by an audiologist and an ENT specialist. RESULTS: The PTA results showed that the patient had mild hearing impairment overall, with the loss being more severe in the left ear than in the right. The OAE test results revealed that in-ear of the left side, 84.5% of subjects passed and 15.5% of subjects struggled and were referred to an ear specialist, whereas in the right ear, 82.7% of subjects passed and 17.3% struggled and were referred to an ear specialist. According to this study, in a right-handed study participant, the ear on the left side is more vulnerable than the right side. Differences in the mean hearing threshold at 4000 and 6000 Hz in the left ear were statistically significant in the groups of workers with eleven to fifteen years of practical experience and twenty-one to twenty-five years of practical experience, respectively (Minervini, et al. J Clin Med 12:2652, 2023). CONCLUSIONS: A statistically meaningful threshold shift from 4000 to 6000 Hz is observed as the working experience grows, and this is suggestive of sensorineural hearing impairment brought on by the noisy dental environment.

[Occupational protection effect of two protective devices for manual cleaning and oiling of dental handpieces on operators].

Objective: To explore the occupational protective effect of different protective devices on the operators during manual cleaning and oiling of dental handpieces, and to provide a basis for the selection of appropriate protective methods. Methods: From November 2020 to December 2021, 20 high-speed dental handpieces of the same brand were selected and randomly divided into disposable protective bag group and small aerosol safety cabinet group by drawing lots, with 10 in each group. After recording the model, they were distributed to the clinical fixed consulting room for use, and were collected by specially-assigned personnel every day for manual cleaning under the protection of the two devices. By measuring the number of airborne colonies, the concentrations of particulate matter and the satisfaction of operators, the occupational protection effect of the two protective devices on operators was evaluated. Results: Under the protection of the two devices, the average number of airborne colonies after operation was less than 1 CFU/ml. When no protective device was used, the number concentration of particulate matter produced during operation was (21595.70±8164.26) pieces/cm(3). The number concentrations of particles produced by disposable protective bag group [ (6800.24±515.05) pieces/cm(3)] and small aerosol safety cabinet group [ (5797.15±790.50) pieces/cm(3)] were significantly lower than those without any protective device (P<0.001). The number concentration of particle matter of small aerosol safety cabinet group was significantly lower than that of disposable protective bag group (P<0.001). In the satisfaction evaluation of operators, small aerosol safety cabinet group [ (3.53±0.82) points] was significantly better than disposable protective bag group [ (2.23±1.10) points] (P<0.001) . Conclusion: The use of small aerosol safety cabinet during manual cleaning and oiling of dental handpieces has good protective effect, superior safety performance and strong clinical applicability, and has advantages in occupational protection of clinical operators.

Assessment of knowledge, awareness and practices toward the use of 3D printing among dental laboratory technicians in Karnataka, India: A cross-sectional study.

With the use of CAD/CAM technology and rapid prototyping, the opportunities for digitisation and technology are unlimited. 3D printing is going to revolutionise traditional teaching and laboratory methods with rapid progress of new materials, printing technology and machines. Given the large number of options available, one must keep up with the current and emerging technology in order to make benefit of the same. The aim of the study is to assess dental laboratory technicians' knowledge, understanding and practices related the use of 3D printing in dentistry in India. Methods: From November 2021 to January 2022, a cross-sectional questionnaire-based study was done among dental laboratory technicians in India. Dental technicians were given access to a self-explanatory questionnaire via Google forms link consisting of 12 questions that evaluated their knowledge, awareness and practices regarding 3D printing. The CHERRIES protocol for presenting the findings of the survey was followed. Chi-square test and independent t-test was used for statistical analysis by SPSS version 20.0. Results: A total of 191 responses were obtained after the questionnaire was circulated to 220 technicians. 171 dental technicians (89.53%) were acquainted of the usage of 3D printing in dentistry.169 (88.48%) Dental technicians preferred 3D printing to traditional procedures. Majority of dental technicians indicated they want to include the 3D printing into their regular work practices and believe digital technology will enhance our profession. Conclusion: The level of awareness of digital dentistry and 3D printing among the participants is acceptable. Dental technicians at private laboratory showed better understanding about 3D printing as compared to technicians working at dental colleges nevertheless, dental education programmes, webinars and hands-on training should be undertaken that will enhance their expertise of 3D printing.

Assessment of knowledge, awareness, and practices toward the use of 3D printing in dentistry among dental practitioners and dental technicians: A cross-sectional study.

Background: The applications and scope of digitization and technology in dentistry are becoming increasingly valuable right from clinical dentistry to research, student training, teaching, and laboratory techniques. Mastering 3D printing and its usage are essential for dental practitioners and dental technicians as it allows them to choose and necessarily know what is offered, as well as how to implement it in everyday practices thereby contributing to the betterment of the dental profession. The study aims to assess dental practitioners' and dental technicians' knowledge, understanding, and practices related to the use of 3D printing in dentistry. Methods: A cross-sectional questionnaire-based study was done among dental practitioners and technicians in Karnataka, India who were given access to a self-explanatory questionnaire via Google link consisting of questions that evaluated their knowledge, awareness, and practices regarding 3D printing. The Chi-square test was used for statistical analysis. Results: A total of 380 replies were obtained after the questionnaire was circulated. Awareness regarding the use of digital technology in dentistry was known by 98.9% of practitioners and 92.7% of technicians, of which we discovered that 9.28% of practitioners and 17.7% of technicians were unfamiliar with 3D printing, which was statistically significant (p = 0.0400*). 81.6% of practitioners consider 3D printing can be used to fabricate complex design prostheses. Conclusion: The participants' understanding of digital dentistry and 3D printing is acceptable. The majority of dental professionals expressed an interest in adopting 3D printing and believe that there should be a forum for collecting and exchanging skills and knowledge about 3D printing.

Occupational protection effect of two protective devices for manual cleaning and oiling of dental handpieces on operators / 中华劳动卫生职业病杂志

Objective: To explore the occupational protective effect of different protective devices on the operators during manual cleaning and oiling of dental handpieces, and to provide a basis for the selection of appropriate protective methods. Methods: From November 2020 to December 2021, 20 high-speed dental handpieces of the same brand were selected and randomly divided into disposable protective bag group and small aerosol safety cabinet group by drawing lots, with 10 in each group. After recording the model, they were distributed to the clinical fixed consulting room for use, and were collected by specially-assigned personnel every day for manual cleaning under the protection of the two devices. By measuring the number of airborne colonies, the concentrations of particulate matter and the satisfaction of operators, the occupational protection effect of the two protective devices on operators was evaluated. Results: Under the protection of the two devices, the average number of airborne colonies after operation was less than 1 CFU/ml. When no protective device was used, the number concentration of particulate matter produced during operation was (21595.70±8164.26) pieces/cm(3). The number concentrations of particles produced by disposable protective bag group [ (6800.24±515.05) pieces/cm(3)] and small aerosol safety cabinet group [ (5797.15±790.50) pieces/cm(3)] were significantly lower than those without any protective device (P<0.001). The number concentration of particle matter of small aerosol safety cabinet group was significantly lower than that of disposable protective bag group (P<0.001). In the satisfaction evaluation of operators, small aerosol safety cabinet group [ (3.53±0.82) points] was significantly better than disposable protective bag group [ (2.23±1.10) points] (P<0.001) . Conclusion: The use of small aerosol safety cabinet during manual cleaning and oiling of dental handpieces has good protective effect, superior safety performance and strong clinical applicability, and has advantages in occupational protection of clinical operators.

La technologie CAD CAM: enquête auprès des techniciens dentaires de la ville de Rabat / CAD/CAM-Technology: A Survey among dental technicians in Rabat

La profession de prothésiste dentaire évolue et s'inscrit pleinement dans l'ère numérique. Cette révolution technologique s'est fait connaître sous le nom de CFAO dentaire (conception et fabrication Assistées par ordinateur), qui regroupe l'ensemble des étapes de numérisation et de conception informatique (CAO) et celles de fabrication à l'aide des machines-outils (FAO). La CFAO dentaire date de plus de 40 ans avec la thèse du Dr François Duret en 1973 intitulée « l'empreinte optique ¼, son développement a été, et reste encore, intimement dépendant des évolutions et des progrès de l'ingénierie et de l'informatique. Au sein du laboratoire de prothèse dentaire, la CFAO a connu une ascension fulgurante. En effet, cette technique a totalement modifié la pratique quotidienne des prothésistes dentaires en remplaçant certaines techniques traditionnelles. Cette nouvelle façon de concevoir les prothèses a permis ainsi aux laboratoires d'améliorer leurs travaux en termes de précision, de reproductibilité et de diversité des matériaux, tout cela en diminuant les erreurs en liaison avec le facteur humain. La CFAO a-elle véritablement remplacé les techniques conventionnelles dans la réalisation des prothèses dentaires ? Présente-t-elle de véritables avantages pour les prothésistes ? La CFAO a-t-elle un avenir au sein des futurs laboratoires de prothèse dentaire ? C'est dans ce sens que ce travail a été mené, afin d'étudier l'intégration et l'utilisation de la CFAO au laboratoire dentaire, à travers une enquête descriptive auprès des prothésistes dentaires exerçant dans la ville de Rabat, et de comprendre l'impact de cette technique sur l'exercice quotidien du prothésiste.

The dental technician profession is evolving and is fully integrated into the digital era. This technological revolution has become known under the name of dental CAD/CAM (computer-aided design and computer-aided manufacturing), which includes all the steps of digitization and computer design (CAD) and those of manufacturing with the help of machine tools (CAM). Dental CAD/CAM dates back more than 40 years with the thesis of Dr. François Duret in 1973 entitled "the optical impression", its development has been, and still is, intimately dependent on the evolution and progress of engineering and computer science. In the dental laboratory, CAD/CAM is on a meteoric rise. Indeed, this technique has completely changed the daily practice of dental technicians by replacing certain traditional techniques. This new way of designing prostheses has enabled laboratories to improve their work in terms of precision, reproducibility, and diversity of materials while reducing errors related to the human factor. Has CAD/CAM replaced conventional techniques in producing dental prostheses? Does it offer real advantages for dental technicians? Does CAD/CAM have a future in the dental laboratories of the future? In this sense, this work was conducted to study the integration and use of CAD/CAM in the dental laboratory through a descriptive survey of dental technicians practicing in the city of Rabat and to understand the impact of this technique on the daily practice of the prosthetist.

Acceptance and experience of digital dental technology, burnout, job satisfaction, and turnover intention for Taiwanese dental technicians.

BACKGROUND: Digital dental technology (DDT) has progressed and been introduced to Taiwan in the recent years, gradually changing the industry ecology. Many studies have demonstrated that DDT is more accurate and faster than conventional dental technology. However, there is a paucity of research exploring dental technicians' perspectives on digital dental techniques, and their burnout, job satisfaction, and turnover intention. METHODS: This cross-sectional survey with convenience sampling was conducted at the conference venue of the Taiwan Association of Dental Technology to investigate the perspectives of dental technicians. We used the snowballing method in this study; two sampling methods were adopted, a convenience sampling of dental technicians to complete a survey, followed by asking the survey participants of the convenience sample to invite their colleagues to participate in the online survey. The survey questionnaire included questions on demographics, work-related information, acceptance and experiences of dental technicians toward DDT, occupational burnout, job satisfaction, and turnover intention. Regression models were used to determine the predictors of job satisfaction and determinants of turnover intention. RESULTS: In total, 341 valid questionnaires were obtained. Overall, the participants reported long working hours (95.5%), positive score on the DDT acceptance scale, moderate job satisfaction, higher personal burnout, and work burnout, along with lower over-commitment. Among them, 32.9% and 28.2% reported the intention to leave their organization and profession, respectively. The stepwise multiple regression model revealed that higher work burnout decreased job satisfaction, while higher DDT acceptance and position as employer increased job satisfaction. The binary logistic regression models revealed that geographical area of workplace, work burnout, and job satisfaction were significant predictors of turnover intentions. CONCLUSIONS: Many Taiwanese dental technicians reported turnover intentions and higher burnout. With the trend of digitalization in the dental industry, even though most dental technicians had a positive outlook toward DDT, its influence on job satisfaction appears limited. Retaining good and professional talents required of a dental technician is crucial, especially as Taiwan's dental care becomes increasingly specialized. Strategies for improving the work environment and occupational health of dental technicians should thus be the focus of future studies.

Knowledge and awareness on pneumoconiosis among dental technicians and senior dental technology students in Saudi Arabia.

Dental technicians' pneumoconiosis is a condition that causes interstitial inflammation and fibrosis as a result of complex drug exposure. Therefore, it is of interest to assess and evaluate the knowledge and awareness about pneumoconiosis and other respiratory disorders among dental technicians and dental technology students in Saudi Arabia. A cross sectional survey was conducted on convenient sample of 300 senior dental technician students and dental technicians from Saudi Arabia and informed consent was obtained. The participants were approached through online questionnaire using Google forms. Questions were related to the socio-demographic data, knowledge and awareness of the students and the practicing dental technicians and their willingness to learn about pneumoconiosis. Final year undergraduate, interns and Dental technicians were included, undergraduate students without practical knowledge and experience and participants with history of respiratory disease were excluded from the study. Questions were assessed by face validity. The data was analyzed using Statistical Package for Social Sciences software. Descriptive statistics was calculated. 34.8% of the study group were not aware of the term and don't know about the etiology of pneumoconiosis. Pearson correlation was significant in terms of awareness difference between males and females and females had less awareness compared to males.

Effects of loupes and microscopes on a dental technician's working posture from ergonomic aspects.

OBJECTIVES: This work aimed to study the effects of loupes and microscopes on a dental technician's working posture during practical operation from ergonomic aspects. The technician's working postures under the conditions of the naked eye, loupes, and microscopes were compared. The practical value of loupes and microscopes was assessed based on the evaluation index of working posture from ergonomic aspects. METHODS: Three dental technicians who were skilled in using loupes and microscopes from West China Stomatology Technology Department of Sichuan University were involved in this prospective rando-mized controlled trial. Before the operation, cameras were installed in the sagittal position, top-view position, and dorsal position of the operation. Each technician made five porcelain veneers of the right maxillary central incisor following the standard process. A chairside computer-aided design and computer-aided manufacturing (CAD/CAM) system was used to mill and layer the ceramic block under the naked eye (A: control group), 3.5× headwear loupes (B: loupe group), and 9× desktop microscopes (C: microscope group). The working posture was recorded by videos throughout the entire process. After each operation, the investigator used OpenPose to recognize the working posture. The joint angles of the arm, elbow, wrist, neck, and trunk, as well as their corresponding rapid upper limb assessment (RULA) scores, were calcula-ted by MATLAB. The working posture was assessed from ergonomic aspects based on the joint angles, RULA scores, and operation time. Statistical analysis was performed using SPSS 26.0. RESULTS: The RULA score of upper limb joint angles showed that the angles of the arm, elbow, wrist, neck, and trunk under the naked eye were 14.93°±9.44°, 120.19°±2.99°, 23.97°±2.84°, 47.27°±5.72°, and 7.76°±2.30°, respectively. All of the joint angles were significantly different among the three groups (P<0.05). Compared with the control group, the angles of the neck and trunk in the loupe group were reduced by 29.09% and 42.53%, respectively, whereas those in the microscope group were significantly reduced by 43.99% and 87.11%, respectively. Multiple comparisons by LSD for the angles of neck and trunk revealed that the loupe group and the microscope group were significantly different from the control group (P<0.05), and they were also significantly different from each other (P<0.05). The mean RULA scores were 6.24±0.34 in the control group, 5.53±0.35 in the loupe group, and 3.31±0.19 in the microscope group. Compared with the control group, the mean RULA score in the loupe group was lower, and that in the microscope group was significantly lower. The differences between every two groups were statistically significant (P<0.05). The mean RULA score in the microscope group was significantly lower than that in the loupe group (P<0.05). The average operation times of the control group, loupe group, and microscope group were (50.69±36.78), (52.01±34.65), and (59.44±35.81) min, respectively. No significant difference was found among the three groups (P>0.05). CONCLUSIONS: Use of loupes and microscopes showed an improvement in ergonomics and working posture of dental technicians. Microscopes had a better effect in the ergonomic convenience of the technician than loupes.

Avaliação dos impactos financeiros gerados pela pandemia da Covid-19 aos técnicos de prótese dentária no Brasil / Assessing the financial impacts of the COVID-19 pandemic on denture technicians in Brazil

Resumo Introdução a pandemia da Covid-19 e medidas de controle da sua expansão impactaram diferentes segmentos da economia, dentre eles os profissionais da Odontologia. Objetivo este trabalho analisou o impacto financeiro gerado pela pandemia da Covid-19 aos técnicos de prótese dentária (TPDs) no Brasil. Material e método por meio de um estudo transversal descritivo, aplicou-se aos TPDs do Brasil um questionário relacionado ao perfil sociodemográfico e profissional, impacto financeiro e medidas adotadas para minimizar seus efeitos. O questionário foi aplicado de forma on-line em redes sociais entre 27 de janeiro e 15 de fevereiro de 2021. Resultado demonstrou-se que 59,8% dos participantes eram do sexo masculino; 47,5% até 30 anos de idade e 57,3% com menos de 10 anos de prática. As medidas para contenção da propagação do coronavírus impactaram financeiramente 89,6% dos participantes; 72,0% interromperam totalmente seus trabalhos; 97,7% tiveram redução no faturamento; 98,2% tiveram mudança na rotina de trabalho; 94,8% tiveram aumento das despesas do laboratório no período; houve queda do faturamento para 41,2% entre 0% e 25,0% e para 36,3% entre 25,0% e 50,0%; 66,6% continuaram trabalhando durante a pandemia devido à sua situação financeira. Não pensaram em fechar seu laboratório de forma definitiva 71,8% dos participantes; 92,2% seguiram rotineiramente os cuidados de higienização e 21,6% fizeram uso das reservas financeiras. Conclusão os TPDs tiveram impacto financeiro durante o período da pandemia da Covid-19 causado principalmente pela diminuição da carga horária de trabalho, redução do faturamento e aumento do custo operacional devido à mudança na rotina de biossegurança.

Abstract Introduction the COVID-19 pandemic and measures to control its expansion impacted different segments of the economy, including dentistry professionals. Objective this study analyzed the financial impact of the COVID-19 pandemic on dental technicians in Brazil. Material and method this is a descriptive cross-sectional study with the application of a questionnaire of sociodemographic and professional profile, financial impact, and effect containment measures to dental technicians in Brazil. The questionnaire was applied online on social networks between January 27 and February 15, 2021. Result 59.8% of the participants were male, with 47.5% aged up to 30 years, and 57.3% with less than 10 years of practice. The measures to contain the spread of the coronavirus had a financial impact on 89.6% of the participants: 72.0% had their work completely interrupted, 97.7% had their billing reduced, 98.2% changed their work routine, and 94.8% had higher laboratory expenses in the period. Revenue decreased between 0% and 25.0% for 41.2% and between 25.0% and 50.0% for 36.3%. In addition, 66.6% continued working during the pandemic due to their financial situation. 71.8% of the participants did not consider closing their laboratory permanently, whereas 92.2% followed hygiene protocols routinely and 21.6% made use of their financial reserves. Conclusion dental technicians were financially impacted by the COVID-19 pandemic, mainly caused by fewer working hours, revenue reduction, and higher operating costs due to the change in the biosafety routine.

Infection control awareness level among dental laboratory technicians, Riyadh, Saudi Arabia.

AIMS AND OBJECTIVES: Infection control is an essential part in dental practices. Potential disease transmission in the dental lab is well documented. Dental technicians should strictly adhere to the standard precautions in order to prevent potential risks of cross-contamination, thereby producing a safe environment for patients and staff. The aim of this study was to evaluate the knowledge, attitude, and practice among dental lab technicians toward infection control protocols at the dental laboratories of Riyadh. MATERIALS AND METHODS: A self-administered questionnaire will be distributed to dental lab technicians working at both private and governmental laboratories in Riyadh, Saudi Arabia. Data were collected from one hundred and twenty-one dental laboratory technicians. RESULTS: According to the findings, only 42.9% had an infection control manual display in the dental lab, 43.8% had received infection control training courses as part of their orientation, 40.4% of the technicians had a valid hepatitis B vaccination. Dental technicians are exposed to high risk of injuries, 72.7% of respondents answered Yes, when they were asked about reporting sharp injuries to laboratory administration. CONCLUSION: There was poor compliance to infection control procedures, dental techniques are at increased risk of cross-contamination and infection, they have limited orientation and knowledge on the infection control guideline and policy.

Respiratory symptoms of exposure to substances in the workplace among dental laboratory technicians.

BACKGROUND: As dental technicians are exposed to a variety of airborne chemicals that can act as irritants and sensitizers, and may give rise to work-related respiratory symptoms, the aim of this study was to estimate the prevalence of respiratory symptoms of exposure to substances in the workplace and associated risk factors in dental laboratory technicians. MATERIAL AND METHODS: A cross-sectional study was performed among 539 dental technicians in the Plovdiv region using a self-report questionnaire. A multiple logistic regression analysis was performed in order to investigate the relationship between sex, work experience, daily exposure to chemicals from the dental environment, and a history of atopic disorder with work-related respiratory symptoms. RESULTS: A total of 539 dental technicians completed the questionnaire. The prevalence of self-reported work-related respiratory symptoms was 26.2%. Based on logistic regression, the most significant factors associated with work-related respiratory symptoms were daily exposure of >8 h (OR = 5.83, 95% CI: 1.96-17.34) and the lack of a ventilation system (OR = 4.26, 95% CI: 2.39-7.58). Dental technicians with work experience of <5 years more often reported work-related respiratory symptoms (OR = 1.83, 95% CI: 1.14-3.44) compared to those with long-term exposure of >20 years. A personal history of asthma (OR = 3.74, 95% CI: 1.39-10.07), allergic rhinoconjunctivitis (OR = 2.10, 95% CI: 1.29-3.41) and atopic dermatitis (OR = 2.32, 95% CI: 1.23-4.38) was also associated with work-related respiratory symptoms. CONCLUSIONS: The findings of this study suggest that work-related respiratory symptoms are frequent among dental technicians and occur early in their career. A more comprehensive study should be conducted throughout the country in order to estimate the prevalence, and to establish effective programs and techniques of preventing work-related respiratory symptoms in dental technicians. Med Pr. 2021;72(2):105-11.

[Understanding and thinking about the current development of digital prosthodontic technology in China].

Digital prosthodontic technology has brought great changes to the prosthodontic technology in China by improving the quality of prostheses, adding new types of restorations, changing the manufacturing methods of restorations from handmade to computer-aided manufacturing, bringing new operating models of dental laboratories, and promoting the academic status of the prosthodontic technology. Digital prosthodontic technology still has some problems, such as insufficient precision for some manufacturing methods and shortage of professionals. Technicians and administrators of prosthodontic technology should face up to the problems and seize the opportunities, to improve the level of prosthodontic technology and train the highly educated professionals. At the same time, attentions should be payed to the advantages of the traditional prosthodontic technology while grasping the development of the digital prosthodontic technology. The dentists and the dental technicians should learn together and enhance communication to each other, to promote the progress of digital prosthodontic technology in China.

Hearing Assessment of Dental Personnel: A Cross-sectional Exploratory Study.

AIM: Dental professionals are prone to have hearing impairment due to prolonged exposure of noise in dental college. The aim of the study was to assess the hearing ability of dental personnel working in Yenepoya Deemed to be University, Mangaluru, Karnataka, India. MATERIALS AND METHODS: A cross-sectional exploratory study was conducted on 60 subjects (30 male and 30 female). Audiometric analysis was carried out using pure-tone audiometry (PTA) and otoacoustic emission test (OAE). STATISTICAL ANALYSIS: Data were calculated and analyzed using two-way analysis of variance and Tukey's honestly significant difference test. RESULTS: No statistically significant difference was observed between hearing loss and its association with age, gender, working experience, mean daily working time, and specialization. PTA results showed a statistically significant hearing loss in the left ear, showing a dip at frequency of 4000 Hz among working experience group of 11-15 years and at 6000 Hz for 21-25 years. Also, a statistically significant hearing loss was observed in the left ear at 6000 and 8000 Hz for the age-group of 51-55 years. OAE results were consistent with PTA findings. CONCLUSION: Dentists and dental personnel are at a higher risk of noise-induced hearing loss. As the working experience increases, the threshold shift is seen to shift from 4000 to 6000 Hz, which is indicative of sensorineural hearing loss due to noise-induced dental environment.

12-year data on skin diseases in the Finnish Register of Occupational Diseases II: Risk occupations with special reference to allergic contact dermatitis.

BACKGROUND: Detailed epidemiological studies on occupational skin diseases (OSDs) are scarce. OBJECTIVES: To analyze risk occupations for OSDs in the Finnish Register of Occupational Diseases (FROD). METHODS: We retrieved numbers of OSD cases (excluding skin infections) for different occupations from the FROD in 2005-2016. In the FROD, Finnish ISCO-08-based classification of occupations was used since 2011, and the preceding ISCO-88-based version until 2010. We combined cases from the earlier and the later period using conversion tables provided by Statistics Finland. We included occupations with at least five cases and analyzed them in detail. We calculated incidence rates for OSDs and separately for allergic contact dermatitis (ACD) in different risk occupations using national labor force statistics. We also studied causes of ACD in these occupations. RESULTS: Risk occupations with the largest number of OSD cases included farmers, hairdressers, assistant nurses, cooks, cleaners, machinists, and nurses. Occupations with the highest incidences of OSDs comprised spray painters (23.8/10 000 person years), bakers (20.4), and dental technicians (19.0). Epoxy compounds and acrylates were prominent causes of ACD in occupations with the highest incidences of ACD. CONCLUSIONS: Uniform use of International Standard Classification of Occupations (ISCO) would facilitate comparisons of OSD figures in different countries.

Clinical dental technicians in the United Kingdom: A qualitative understanding of the experiences, of practices and challenges of communication for dental professionals.

AIM: To investigate the roles and relationships of registered Clinical Dental Technicians (CDTs) in the dental team and healthcare systems, and their perspective as a professional group in the United Kingdom (UK). METHODS: This qualitative study was conducted following a national questionnaire survey of CDTs, 18 of whom participated in semi-structured interviews; they were purposively sampled to represent the diversity and demography of CDTs. A topic guide, informed by the literature and survey findings, guided discussions which were recorded and transcribed verbatim. Drawing upon phenomenological and cultural relativistic theories, thematic analysis was conducted, thus enabling an "analytic story" of the lived experience to emerge. RESULTS: Clinical dental technicians expressed pride, passion and satisfaction in their work yet feel misunderstood in their role. Experiences of being accepted and incorporated into the wider dental profession are strained. Ultimately, there is a complex web of inter-dependence between all actors-a triadic relationship-bounded by policymakers and regulators which directly impacts on best practice and the balance between collaboration and autonomy. Looking to the future, Ideal practice may involve different models of care, with examples of good practice emerging. CONCLUSION: This paper provides a unique examination of the lived experience, feelings and relationships of CDTs. The perceptions of their role, their inter-professional relations and the progression as a professional group must be addressed, and their potential to work collaboratively actively engaged to serve our ageing population.

Disinfection of dental impressions: knowledge and practice among dental technicians.

Background: Dental impressions are a common source for transmission of infection between dental clinics and dental labs. Dental impressions can be cross-contaminated by patient's saliva and blood, which then cross-infect the dental casts poured from the impressions. Objective: To evaluate the current practices of disinfection of dental impressions and their protocols and to assess the knowledge of cross-infection control among dental technicians in Jordan. Method: Dental technicians (n=85) completed a self-administered questionnaire about their practices of disinfection for dental impressions. Results: The distribution of dental technicians was 63.8% fixed prosthodontics, 23.5% removable prosthodontics, 7.8% orthodontics, and 4.8% maxillofacial prosthodontics. The majority of the laboratories did not have instructions related to disinfection of impressions. About 50% of technicians were vaccinated against HBV. About 44.7%, and 42.9% of labs reported that they never disinfect alginate or silicon impressions, respectively. In addition, the majority of lab owners (53%) believed that the dentist should disinfect the impressions before shipping them to dental laboratories, while (45%) believed that disinfecting the impressions is the responsibility of the dental assistant. Moreover, about 38% of this study population reported not using gloves in their labs. In those labs were disinfection was used, 51% used spray disinfection whereas 32.6% used immersion disinfection. The cost of disinfectant was ranked as the most important factor (51.3% of the cases) for the dental technician to choose the disinfectant followed by its effectiveness. Conclusion: Dental technician practices in impression disinfection was not satisfactory, therefore, education programs about impression disinfection are needed.

Workplace noise exposure and audiometric thresholds in dental technicians.

Noise is a well-known risk factor in occupational medicine. Several studies have been performed in workplaces with noise sources, especially in the industrial field; on the contrary, only a few studies have been carried to evaluate the noise exposure effects in non-industrial workplaces such as small factories, handicraft laboratories, and dental laboratories. The aims of this study were to evaluate workplace noise exposure and hearing thresholds in dental technicians. Four laboratories and 51 dental technicians were included in the study. Noise exposure levels during a nominal eight-hour working day (LEX, 8 h) were assessed in the included laboratories. Audiometric thresholds with pure tone audiometry were performed in 51 dental technicians, and results were compared with those expected in subjects not exposed to noise. The environmental noise measures showed moderate differences of the LEX, 8 h among the four laboratories (range 71.4 to 76.2); average LEX, 8 h was 73.9 ± 2.2 dB(A). The audiometric results showed a progressive increase of hearing threshold values at the frequencies mostly involved in noise-induced hearing loss (3, 4 and 6 kHz) and a correlation with age and working seniority especially in males (p<0.005). Nevertheless, in the 92.1% of subjects the threshold increases were in line with those expected in subjects of the same age and sex not exposed to noise and in the remaining 7.8% were not statistically significant (p>0.05). In 3.9% of the cases the increases were bilateral, typical of noise-induced hearing loss, and only 1.9% showed involvement of several frequencies with worsening of expected thresholds >25 dB. In conclusion, our study showed that exposure to noise in dental laboratories was not sufficient to represent a hazard to hearing, as demonstrated by the LEX, 8 h, which were below 80 dB(A) and therefore below the European exposure limit values and exposure action values for workers.